Shop

L-Bar / I-Bar Sealers

L-bar and I-bar sealers for shrink wrapping products and cartons.

Products

YC3045HL

L-sealer - YC3045HL

L-sealer – YC3045HL – (Flat) L-sealer With the L-sealer, you need a YC4545WR preparation unit. An L-sealer is intended for use with centre-folded plastic film. If the film is to be pulled tight, after sealing, by heat-shrinking, then the preparation unit will be adjusted to perforate the film, so air can escape when the enveloping film shrinks. The end of the roll of film has been sealed by the previous operation, which makes two sides sealed. The goods are inserted between the two layers of film (which are conveniently held open by the preparation unit) and then the arm of the L-sealer is pulled down to seal off the remaining two sides. The L-sealer melts through the plastic, so the excess plastic does not become part of the envelope. Before ordering an L-sealer, measure the dimensions of the largest pack which you intend to enclose in film.

Price on request

Details

YC4545HL

L-sealer - YC4545HL

YC4545HL – (Flat) L-sealer With the L-sealer, you need a preparation unit e.g. YC4545WR .An L-sealer is intended for use with centre-folded plastic film. If the film is to be pulled tight, after sealing, by heat-shrinking, then the preparation unit will be adjusted to perforate the film, so air can escape when the enveloping film shrinks. The end of the roll of film has been sealed by the previous operation, which makes two sides sealed. The goods are inserted between the two layers of film (which are conveniently held open by the preparation unit) and then the arm of the L-sealer is pulled down to seal off the remaining two sides. The L-sealer melts through the plastic, so the excess plastic does not become part of the envelope. Before ordering an L-sealer, measure the dimensions of the largest pack which you intend to enclose in film.

Price on request

Details

YC4545LB

L-sealer - YC4545LB

YC4545LB – (Adjustable) L-sealer With the L-sealer, you need a preparation unit {link to YC600HLF-T}.An L-sealer is intended for use with centre-folded plastic film. If the film is to be pulled tight, after sealing, by heat-shrinking, then the preparation unit will be adjusted to perforate the film, so air can escape when the enveloping film shrinks. The end of the roll of film has been sealed by the previous operation, which makes two sides sealed. The goods are inserted between the two layers of film (which are conveniently held open by the preparation unit) and then the arm of the L-sealer is pulled down to seal off the remaining two sides. The L-sealer melts through the plastic, so the excess plastic does not become part of the envelope. Before ordering an L-sealer, measure the dimensions of the largest pack which you intend to enclose in film.

Price on request

Details

YC4560HL

L-sealer - YC4560HL

YC4560HL – (Flat) L-sealer With the L-sealer, you need a preparation unit {link to YC600HLF-T}.An L-sealer is intended for use with centre-folded plastic film. If the film is to be pulled tight, after sealing, by heat-shrinking, then the preparation unit will be adjusted to perforate the film, so air can escape when the enveloping film shrinks. The end of the roll of film has been sealed by the previous operation, which makes two sides sealed. The goods are inserted between the two layers of film (which are conveniently held open by the preparation unit) and then the arm of the L-sealer is pulled down to seal off the remaining two sides. The L-sealer melts through the plastic, so the excess plastic does not become part of the envelope. Before ordering an L-sealer, measure the dimensions of the largest pack which you intend to enclose in film.

Price on request

Details

YC4560LB

L-sealer - YC4560LB

YC4560LB – (Adjustable) L-sealer With the L-sealer, you need a preparation unit {link to YC600HLF-T}.An L-sealer is intended for use with centre-folded plastic film. If the film is to be pulled tight, after sealing, by heat-shrinking, then the preparation unit will be adjusted to perforate the film, so air can escape when the enveloping film shrinks. The end of the roll of film has been sealed by the previous operation, which makes two sides sealed. The goods are inserted between the two layers of film (which are conveniently held open by the preparation unit) and then the arm of the L-sealer is pulled down to seal off the remaining two sides. The L-sealer melts through the plastic, so the excess plastic does not become part of the envelope. Before ordering an L-sealer, measure the dimensions of the largest pack which you intend to enclose in film.

Price on request

Details

YC6080HL

L-sealer - YC6080HL

(Flat) L-sealer – YC6080HL Flat-type L-sealer With the L-sealer, you need a preparation unit {link to YC600HLF-T}.An L-sealer is intended for use with centre-folded plastic film. If the film is to be pulled tight, after sealing, by heat-shrinking, then the preparation unit will be adjusted to perforate the film, so air can escape when the enveloping film shrinks. The end of the roll of film has been sealed by the previous operation, which makes two sides sealed. The goods are inserted between the two layers of film (which are conveniently held open by the preparation unit) and then the arm of the L-sealer is pulled down to seal off the remaining two sides. The L-sealer melts through the plastic, so the excess plastic does not become part of the envelope. Before ordering an L-sealer, measure the dimensions of the largest pack which you intend to enclose in film.

Price on request

Details

YC6080LB

L-sealer - YC6080LB

YC6080LB – (Adjustable) L-sealer With the L-sealer, you need a preparation unit. An L-sealer is intended for use with centre-folded plastic film. If the film is to be pulled tight, after sealing, by heat-shrinking, then the preparation unit will be adjusted to perforate the film, so air can escape when the enveloping film shrinks. The end of the roll of film has been sealed by the previous operation, which makes two sides sealed. The goods are inserted between the two layers of film (which are conveniently held open by the preparation unit) and then the arm of the L-sealer is pulled down to seal off the remaining two sides. The L-sealer melts through the plastic, so the excess plastic does not become part of the envelope. Before ordering an L-sealer, measure the dimensions of the largest pack which you intend to enclose in film.

Price on request

Details

YC4545LA

L-sealer w/electromagnet - YC4545LA

L-sealer w/electromagnet (Adjustable) – YC4545LA With the L-sealer, you need a preparation unit {link to YC600HLF-T}.An L-sealer is intended for use with centre-folded plastic film. If the film is to be pulled tight, after sealing, by heat-shrinking, then the preparation unit will be adjusted to perforate the film, so air can escape when the enveloping film shrinks. The end of the roll of film has been sealed by the previous operation, which makes two sides sealed. The goods are inserted between the two layers of film (which are conveniently held open by the preparation unit) and then the arm of the L-sealer is pulled down to seal off the remaining two sides. The L-sealer melts through the plastic, so the excess plastic does not become part of the envelope. Before ordering an L-sealer, measure the dimensions of the largest pack which you intend to enclose in film.

Price on request

Details

YC4560LA

L-sealer w/electromagnets - YC4560LA

YC4560LA – (Adjustable) L-sealer w/electromagnets With the L-sealer, you need a preparation unit {link to YC600HLF-T}.An L-sealer is intended for use with centre-folded plastic film. If the film is to be pulled tight, after sealing, by heat-shrinking, then the preparation unit will be adjusted to perforate the film, so air can escape when the enveloping film shrinks. The end of the roll of film has been sealed by the previous operation, which makes two sides sealed. The goods are inserted between the two layers of film (which are conveniently held open by the preparation unit) and then the arm of the L-sealer is pulled down to seal off the remaining two sides. The L-sealer melts through the plastic, so the excess plastic does not become part of the envelope. Before ordering an L-sealer, measure the dimensions of the largest pack which you intend to enclose in film.

Price on request

Details

YC6080LA

L-sealer w/electromagnets - YC6080LA

YC6080LA – (Adjustable) L-sealer w/electromagnets With the L-sealer, you need a preparation unit . An L-sealer is intended for use with centre-folded plastic film. If the film is to be pulled tight, after sealing, by heat-shrinking, then the preparation unit will be adjusted to perforate the film, so air can escape when the enveloping film shrinks. The end of the roll of film has been sealed by the previous operation, which makes two sides sealed. The goods are inserted between the two layers of film (which are conveniently held open by the preparation unit) and then the arm of the L-sealer is pulled down to seal off the remaining two sides. The L-sealer melts through the plastic, so the excess plastic does not become part of the envelope. Before ordering an L-sealer, measure the dimensions of the largest pack which you intend to enclose in film.

Price on request

Details

YC6080LB-1

L-sealer-YC4545LB

Price on request

Details

YC-4545WR

YC-4545WR-(flat) Preparation unit

Flat -type Preparation unit A preparation unit like this intended to: hold a roll of centre-folded plastic film, perforate the film (if required), separate the film, and provide a work-surface on which the product can be placed between the layers of film. It has rubber feet to stand on a level surface. Position the roll in such a way that the user is pulling the material from the bottom (not the top) of the roll. In this way, the roll balances on the preparation unit. The preparation unit can be secured to the work surface with screws or bolts. The best work surface to use is our sturdy steel workbench with adjustable feet. The preparation unit can hold a roll as wide as 470mm. It is intended for use with a flat-type L-sealer, e.g YC3045HL

Price on request

Details